IMPORTANT SAFETY INSTRUCTIONS
When using electrical appliances, basic safety precautions should always be followed, including the following:
Read all instructions before installation or use of the coffee system.
Please read these instructions carefully to prevent accidents and machine damage.
This appliance is for household use only. Use appliance only for its intended use. Any other use could be dangerous.
This appliance complies with current safety requirements. Improper use of the appliance can cause personal injury and material damage.
The manufacturer cannot be held responsible for damage caused by improper use of the appliance.
Electrical safety
Before connecting the appliance to the electrical supply make sure
that the voltage and frequency details listed on the data plate correspond with the household electrical supply. If in doubt, consult a qualified technician.
The appliance must be properly installed before operation to ensure
that no electrical components are accessible. Ensure that power is not supplied to the appliance while installation, repairs or maintenance work is performed.
Be certain your appliance is properly installed and grounded by
a qualified technician. To guarantee the electrical safety of this appliance, continuity must exist between the appliance and an effective grounding system. It is imperative that this basic safety requirement be met. If there is any doubt, have the electrical system of the house checked by a qualified electrician. The manufacturer cannot be held responsible for damages caused by the lack or inadequacy of an effective grounding system.
Do not use an extension cord to connect the appliance to electricity.
Extension cords do not guarantee the required safety of the appliance (danger of overheating).
This appliance is not designed for maritime use or for use in mobile
installations such as recreational vehicles or aircraft. However, under certain conditions it may be possible for installation in these applications. Please contact the Miele Technical Service Department with specific requirements.
Before service or maintenance work disconnect the power supply
by either removing the fuse, "tripping" the circuit breaker or unplugging the unit.
5
