Installation accessories
a2 recirculation vents (recirculation mode only)
b2 protective shields prevent scratches to the chimney during installation.
c1 protective shield
prevents scratches from the canopy during installation.
d1 diverter (recirculation mode only)
e1 flex hose for connecting the diverter to the exhaust connection.
f2 hose clips for securing the ducting.
g1 reducing collar
for use with 5" (125 mm) exhaust ducting.
h1 non-return flap for vented air extraction only.
iUpper retaining plate B secures the chimney extension.
jMiddle retaining plate C for additional stability of the chimney.
kLower retaining plate A secures the canopy and motor assembly.
12 large headed screws 5 x 40 mm for securing the retaining plates and the canopy.
(S8 wall anchors included in the packaging are not for use in USA / CDN.)
2 M 6 locking nuts for securing the motor assembly.
4 screws 3.9 x 7.5 mm for securing the chimney and the chimney extension
CAUTION:
During the installation process please be careful of sharp edges that can cause harm.
25
