Installation
Retaining plate A
^Drill two 1/8" (3 mm) holes, one at S + 4" (100 mm) and one at S + 16 3/4" (425 mm) on the center line for the retaining plate (see "Appliance dimensions").
^Lightly secure retaining plate A into position using 5 x 40 mm screws through the two holes and use the notches to align with the center line.
^Drill 4 more 1/8" (3 mm) holes through the now fitted retaining plate.
^Screw two 5 x 40 mm screws into the upper two holes.
Retaining plate B
^Hold retaining plate B to the wall and push up until it is directly below the ceiling. Use the notches and the center line to align it horizontally. Mark the 2 drill holes on the wall.
^Drill two 1/8" (3 mm) holes into the wall.
^Secure the retaining plate with two 5 x 40 mm screws.
32