Installation
Electrical connection
Before connecting the appliance read the "Warning and Safety Instructions" and the "Electrical data" sections.
^Plug the 2 connectors on the canopy into the corresponding receptacles left and right of the motor assembly.
Insert the 4 prong connector into the rear and the 3 prong connector into the front receptacle left of the motor assembly.
Insert the 6 prong connector into the receptacle right of the motor assembly.
^Secure the cords with the ties, as shown above.
^Plug in the power cord.
Air extraction exhaust connection
^Connect the ductwork to the exhaust connection using whatever means are appropriate for the type of ductwork being installed (hose clamp, duct tape, etc.)
^Direct the duct through the back wall or the ceiling.
^See "Air extraction" for further details.
35
