Plywood backing

The majority of the weight of the installed ventilation system will be supported by retaining plate A. It must be firmly attached to the stud framing behind the drywall. If studs are not available in the required locations, a plywood backing (min.

1/2" (13 mm) thick) spanning at least two studs must be installed. Failure to adequately support the weight as stated may result in the ventilation system falling off the wall, causing personal injury and property damage.

(If plywood backing is not needed, proceed to "Attaching the retaining plates to the wall." )

To install a plywood backing board

^Make a mark, S + 16 3/4" (425 mm) above the cooktop and on the centerline.

^Make a second mark 12 3/4 "

(324 mm) underneath the first one.

^Hold retaining plate A against the wall so that the marks are visible through the holes of the plate (see "Installation / Retaining plate A"). Draw a line around the plate’s perimeter, then set aside the plate.

^Make a cutting line 3" (76 mm) above and 3" (76 mm) below the outline of plate "A".

^Find the studs to the left and right of the mounting location by tapping the wall or using a stud finder.

^Mark a vertical cutting line along the center of each stud.

Be careful not to damage any wiring or plumbing that may be located behind the wall. Make sure that the power supply to the area where this installation is being performed has been turned off at the breaker panel before cutting into the wall.

^Remove the drywall between the cutting lines and replace it with

plywood of a matching thickness (min. 1/2" (13 mm) thick). Tape the joints and refinish the wall.

^Proceed to "Attaching the Retaining plates to the wall" to complete the installation.

26

Page 26
Image 26
Miele DA218, DA211 installation instructions Plywood backing, To install a plywood backing board

DA211, DA218 specifications

The Miele DA211 and DA218 range hoods represent the pinnacle of modern kitchen ventilation, designed to combine functionality with sleek aesthetics. These hood models provide an effective solution to eliminate cooking odors, smoke, and grease, ensuring a clean and pleasant cooking environment.

The DA211 model is engineered with a powerful motor that efficiently removes unwanted air pollutants generated during cooking. With a maximum extraction rate of up to 600 m³/h, it is adept at handling heavy-duty cooking tasks. The DA218, while also impressive, features slightly enhanced performance metrics, making it suitable for larger kitchens or those that frequently engage in intense cooking.

Both models feature Miele’s innovative AirClean system, which utilizes high-quality filters to deliver optimal air purification. The filters are designed to capture even the smallest airborne particles, ensuring that the air in your kitchen remains fresh and clean. Additionally, the grease filters are dishwasher safe, allowing for easy maintenance and longevity of the appliance.

A notable characteristic of the Miele DA211 and DA218 models is their intuitive user interface, which includes various speed settings and a delayed shut-off option. This allows users to customize the ventilation power according to their cooking needs, while the delayed shut-off ensures that any lingering odors are effectively removed after cooking has stopped.

In terms of design, both models feature a minimalist and elegant aesthetic that seamlessly integrates into any modern kitchen décor. The stainless steel construction not only adds a contemporary look but also ensures durability and resistance to staining and rust. The easy-to-clean surfaces make it convenient for homeowners to maintain their hoods in pristine condition.

Another significant feature of the DA211 and DA218 is their quiet operation. Miele has engineered these models to minimize noise, allowing for a serene cooking atmosphere. This is particularly beneficial for open-plan living spaces where harmony between kitchen and living areas is desired.

Overall, the Miele DA211 and DA218 range hoods stand out for their combination of powerful performance, advanced filtration technologies, whisper-quiet operation, and stylish design. They are ideal choices for anyone looking to enhance their cooking experience while maintaining a clean home environment. Whether you’re a casual cook or a culinary enthusiast, these range hoods will meet your needs with grace and efficiency.