Operation
Filter operating hours counter
The number of hours the appliance has been in operation is stored in memory.
The operating hours counter tells you when the grease filters or charcoal filters need to be cleaned or replaced.
Resetting the grease filter operating hours counter
After 30 hours of operation (or another time if the operating hours counter has been altered), the grease filter indicator lamp will light up. The grease filters must then be cleaned.
Afterwards, the grease filter operating hours counter must be reset.
To do this, press and hold the grease filter control for approximately
3 seconds while the fan is switched on.
The indicator lamp for the grease filter control will go out.
Reading the grease filter operating hours counter
To check the percentage of time set already used:
Switch the fan on with the joystick.
Press and hold the grease filter control.
One or several of the power level indicator lamps will flash.
The number of flashing lamps shows the percentage of the operating time which has already been used up.
1 lamp | = | 25 % |
2 lamps | = | 50 % |
3 lamps | = | 75 % |
4 lamps | = 100 % | |
The number of operating hours used remains in the memory, even when the appliance is switched off or there is a power cut.
16
