Cleaning and care
Changing a halogen lamp
Before any cleaning or maintenance work is carried out, disconnect the cooker hood from the mains supply.
Remove the grease filter.
Remove the charcoal filters if the cooker hood is being used in recirculation mode.
Exercise caution when changing halogen lamps. They get very hot during use, and remain hot for some time after being switched off.
Do not touch the surface directly when changing a lamp, as grease particles from your fingers will adhere to the surface and damage it. Please follow the manufacturer's instructions.
Push down the lighting unit slightly via the opening in the safety panel.
The halogen lamp is now accessible and should be unscrewed
Replace it with a new halogen lamp (specification: GU/GZ 10, 230 V, 50 W). Screw the lamp into the socket and push it upwards. Please follow the manufacturer's instructions.
We recommend only using lamps of the same specification and also made by the same manufacturer as the ones being replaced.
Replace the grease filter and, if being used in recirculation mode, the charcoal filters.
24
