Guide to the appliance
Control panel
Joystick
This is used to operate the fan settings and the lighting.
Hob lighting
Charcoal filters
Special accessory for recirculation mode
DA 2250, DA 2270: 2 filters
DA 2210: 4 filters
Grease filters
Fan setting indicator lamps
Touch control for the run-on option
To activate the
Touch control for the grease filter
The indicator lamp for the grease filters lights up when the grease filters need to be cleaned.
The touch control is used to reset the operating hours counter every time the grease filters are cleaned (see "Cleaning and care").
It can also be used to check and alter the operating hours counter.
Touch control for the charcoal filter
The indicator lamp for the charcoal filter lights up when the charcoal filters used in recirculation mode needs to be replaced. For this to happen, the operating hours counter needs to be activated before the appliance is used for the first time.
The touch control is used to reset the operating hours counter every time the charcoal filters are replaced (see "Cleaning and care").
It can also be used to check and alter the operating hours counter.
For information about using the appliance, see "Operation".
11