Miele G600, G800 manual WaterProof System WPS Restrictor Exchange, 23Tilting the Flow Restrictor

G600 & G800 Electronic Dishwashers

Technical Information

5.25WaterProof System (WPS) Restrictor - Exchange

1.Shut off the water supply.

2.Disconnect the WPS at the plumbing supply connection.

3.Remove the Sealing Washer and Filter from inside the WPS connection

4.Using a 5mm nut-driver; press and tilt the Restrictor to the side; as shown in figure 5-23.

Figure 5-23:Tilting the Flow Restrictor

5.Remove the Restrictor with needle-nose pliers; as shown in figure 5-24.

Figure 5- 24: Removing the Flow Restrictor.

6.Fit the new Restrictor using a suitable 5 mm socket spanner.

Service Tip

Use care when installing a new Flow Restrictor, a damaged Restrictor should never be used.

77