Miele G800, G600 manual Width of Unit As Applicable, Flowmeter Count, Operating Hours

G600 & G800 Electronic Dishwashers

Technical Information

6.2.9Width of Unit (As Applicable)

Some Electronic Units can be installed in more than one specific model number; and therefore require programming the width of the dishwasher it is being installed in. Refer to the model Specific Programming / Service Modes Section for further details.

Note

To ensure proper appliance operation…The Electronic must be programmed for the width of the dishwasher (Fullsize / Slimline) it is installed in.

6.2.10Flowmeter Count

Stores the “numeric value” marked on the side of the Flowmeter to ensure proper operating conditions.

Note

To ensure proper appliance operation…The Flowmeter count must be re-programmed after installation of a new Flowmeter and / or Electronic.

6.2.11Operating Hours

Records the duration (in hours) the appliance has been operated.

6.3Programming / Service Modes - Access Procedures (Model Specific)

Refer to the Dishwasher Service Modes Guide; included at the rear of this section.

100