G600 & G800 Electronic Dishwashers
Technical Information
6.0Fault Diagnosis
6.1General Information
Every electronic controlled Miele dishwasher has three modes accessible for services purposes:
Programming Mode
Service Mode One
Service Mode Two
6.2Programming and Service Mode - Features
6.2.1Water Hardness Programming
Note
The Water Hardness Value can only be programmed if the dishwasher is programmed to the “With Water Softener” setting.
For entering the water hardness (grains per gallon / parts per million) of the incoming water. Refer to the model specific Operating Manual for further details.
6.2.2Drying Options (As Applicable)
Accessed by the customer in the Programming Mode for extending the duration the Turbothermic Fan is on, during drying.
An additional amount of time can also be programmed by a technician using Service Mode 2. Refer to the model specific Timing Chart for details.
6.2.3Water Intake Duration
This setting adjusts the maximum duration the dishwasher has to fill with the proper amount of water. The default setting is two minutes. An extended value of four minutes can be programmed for low pressure conditions.
Note
Since water volume is determined by the Flowmeter, the dishwasher may fill in less time than the actual programmed duration.
98