Problem solving guide
With the aid of the following guide, minor problems can be corrected without a service call.
Repairs should only be carried out by a qualified and trained person in accor- dance with local and national safety regulations. Unauthorized or incorrect re- pairs could cause personal injury or damage the machine.
Problem | Possible cause | Remedy |
The light ring around | The door is not properly | Close the door firmly. |
the program selector | closed. |
|
and the decimal point in | The dishwasher is not | Insert the plug. |
the time display do not | plugged in. |
|
light, after the machine |
|
|
The fuse is defective or | Reset the circuit breaker. | |
has been turned on us- | has tripped. |
|
ing the “On/Off” button |
|
|
The dishwasher stops | The fuse has tripped. | Reset the circuit breaker. |
during a program |
|
|
|
|
|
The “Spray arm” indica- | Tall items are blocking | Open the door and rear- |
tor light is flashing | the middle spray arm. | range items blocking the |
|
| spray arm. |
| The middle spray arm jets | Before fixing the problem |
| are blocked. | you must: |
|
| – Turn the program se- |
|
| lector to the “Stop” po- |
|
| sition, |
|
| – Turn the dishwasher |
|
| off with the “On/Off” |
|
| button, |
|
| then: |
|
| – Clean the spray arm. |
|
|
|
44
