Self Cleaning
If desired, you can set a finish time for the "Self Clean" process during the first five minutes after starting the program. To do this:
Call up the "" symbol and use the "" control to change the end time.
You can change the end time if you wish at any time up until the program starts.
At the end of the "Self Cleaning" process
–"PYE" will appear in the display.
–the "" symbol will start flashing.
–a buzzer will sound, if it is switched on (see "Altering oven settings").
Turn the function selector to "0".
The buzzer will stop and the symbols in the display will go out.
Once the oven has cooled, remove the ash with a damp sponge.
Avoid cleaning the gasket around the interior (sealing the door glass pane).
It is made from glass fiber and will get damaged if rubbed or scrubbed.
A film may build up on the oven door. This can be removed with a shielded blade scraper or a
The "SELF CLEAN" function will stop,
–if the function selector is turned to "0ff".
–if another function is selected during the "Self Cleaning" process "PY" and "" will appear in the display.
–if there is a power failure.
"PY" and "" will appear in the display.
Turn the function selector to "0ff" The oven door will remain locked until the oven temperature has fallen below 535 °F (280 °C).
51
