IMPORTANT SAFETY INSTRUCTIONS
Technical Safety
Installation, repair and maintenance work should be performed by a Miele authorized service technician in accordance with national and local safety regulations and the provided installation instructions. Contact Miele’s Technical Service Department for examination, repair or adjustment. Repairs and other work by unauthorized persons could be dangerous and may void the warranty.
Before installation, make sure that the voltage and frequency listed on the data plate correspond with the household electrical supply. This data must correspond to prevent injury and appliance damage. Consult a qualified electrician if in doubt.
To guarantee the electrical safety of this appliance, continuity must exist between the appliance and an effective grounding system. It is imperative that this basic safety requirement be met. If there is any doubt, have the electrical system of the house checked by a qualified electrician.
Before installing the oven, check for externally visible damage. Do not operate a damaged appliance.
This appliance must not be installed or operated outdoors.
Do not install this appliance near water, e.g. sink, wet basement, swimming pool, etc.
Do not use an extension cord to connect this appliance to electricity. Extension cords do not guarantee the required safety of the appliance.
The appliance must only be operated after it has been correctly installed into cabinetry.
Under no circumstances open the outer casing of the appliance.
While the appliance is under warranty repairs should only be performed by an authorized service technician. Otherwise the warranty is void.
Before servicing, disconnect the appliance from the main power supply.
Defective components should be replaced by Miele original spare parts only. Only with these parts can the manufacturer guarantee the safety of the appliance.
Do not operate any appliance with a damaged cord or plug, or if the appliance has been damaged in any manner. Contact Miele’s Technical Service Department.
This appliance is not designed for maritime use or for use in mobile installations such as recreational vehicles or aircraft. However, under certain conditions it may be possible for installation in these applications. Please contact the Miele Technical Service Department with specific requirements.
5
