Miele H 5961 B Preparation, Start the descaling process, Cleaning and care

Cleaning and care

Preparation	Start the descaling process.
￿ Dissolve one descaling tablet in	￿ Select the "Descale" option.
approx. 600 ml of cold tap water.	￿ Press the OK sensor to start the
￿ Place the universal tray on the top	suction process.
shelf level to collect the descaling	The segment display shows how the
solution after it has been used.
	descaling process is progressing. You
A plastic tube (with clip) is supplied	can hear the pump during the
	descaling process.
with your oven so that you do not
have to hold the container with the	The amount of solution specified can
descaling agent underneath the	be more than the amount which is
water intake tube.	actually taken in which means that
	some of the solution will be left in the
	container at the end of descaling. Top
	the container up with approx. 300 ml of
	water to the container, as the system
	will need to draw in some more liquid
	during the activation phase.
	Once the descaling solution has been
	drawn into the appliance
	– "Activation phase" will appear in the
￿ Attach the plastic tube to the end of	display.
	The activation phase takes
the water intake tube. Place the other
	approx. 60 minutes.
end in the bottom of the descaling
solution container and secure it to the	– the time left for the activation phase
container with the clip.	will be shown counting down in the
￿ Close the door.	display.
	The system will take in more liquid at
	approximately five minute intervals. You
	will hear the noise of the pump for a
	moment or so.
	The oven lighting and the cooling fan
	will remain on during descaling.

68