Heating-upphase, Start, Recommended temperatures, Contrast

Settings

Heating-up phase

The heating-up phase works as follows with the Fan plus, Conventional heat and Auto roast functions:

Rapid

(Factory default)

All the heating elements are switched on together in order to heat the oven up as quickly as possible to the required temperature.

and "Rapid heat-up phase" or "Rapid searing phase" will appear in the display.

Normal

Only the heating elements for the cooking function selected are switched on.

and "Heating-up phase" or "Searing phase" will appear in the display.

Automatic

(Factory default setting)

A programme will start automatically approx. 20 seconds after making your last entry without having to select Start.

Manual

If "Manual" has been selected, "Start" will appear at the beginning of each programme and must be confirmed before the programme will start.

If you frequently change a recommended temperature it may be a good idea to change it permanently.

The recommended temperatures is displayed next to the function.

When you select a function the recommended temperature is highlighted.

The setting range available will also appear.

Display

The contrast is represented by a bar with seven segments.

Factory default: Four illuminated segments.

To change the contrast touch the sensor next to "Lower" or "Higher".

The brightness is represented by a bar with seven segments.

Factory default: Six illuminated segments.

To change the brightness touch the sensor next to "Darker" or "Lighter".