Miele H 5961 B The following will appear in the display, Before the programme starts, Operation

Operation

Sequence of the cooking programme when using Automatic switch-off

The following will appear in the display:

Before the programme starts

–The cooking function and selected temperature

–"Start at" and the start time

After the programme has started

–the heating-up phase until the set temperature is reached

After the heating-up phase

–The "Time left" counting down

–can be followed in the display,

Shortly before the end of the programme

–The oven heating switches off.

–The cooking programme continues using residual heat. The residual heat in the oven is sufficient to complete the cooking process.

–"Energy save" will appear in the display.

–The cooling fans continue to run, as do the hot air fans if a "Fan" setting has been chosen.

At the end of the cooking programme

–The hot air fans switch off, depending on the cooking function being used.

–The message "Programme finished" and the ￿ symbol appear in the display.

–A signal will sound (provided this is activated - see "Settings - Volume - Buzzer tones").

After the programme has finished

–The cooling fans will continue to run for a while after the oven has been switched off to prevent any humidity building up in the oven, on the control panel or in the oven housing unit.

The fans are temperature controlled and will switch off automatically. You can change the default setting for these (see "Settings - Cooling fan run-on").

–To save energy, the oven will switch off automatically if it is not used again within a certain time.

The timing depends on the settings selected (cooking function, temperature, duration).

Changing or deleting an entered cooking time

Selecting "Change" brings up all the options which can be changed.

￿Select the option you want and change it.

Use the ￿ sensor to delete the entered times.

If there is a power cut, all data entered will be deleted.

32