Features
FlexiClip telescopic runners | Fitting the FlexiClip telescopic runners |
The FlexiClip telescopic runners can be clipped into any of the existing shelf runners and pulled out of the oven to their fullest extent.
Push the telescopic runners right in before placing a tray or rack on them.
To prevent the risk of a rack or tray sliding off the runners, make sure that they are sitting securely on their runners in between the stoppers at either end of each runner.
The FlexiClip runners can support a maximum load of 15 kg.
Make sure that the oven has cooled down before moving the FlexiClip runners.
Take care not to burn yourself on them.
The FlexiClip runners are fitted in between the two rails that make up a shelf level.
The telescopic runner with the Miele logo is fitted on the right.
When fitting the FlexiClip runners do not extend them.
Fit the FlexiClip runner in between the two rails at the front (1) and then push it into the oven compartment (2).
Then secure the FlexiClip runner to the bottom of the two rails as illustrated (3).
If the FlexiClip runners are difficult to pull out after fitting, you may need to pull firmly on them once to release them.
17
