Miele KM89-2 manual Installation instructions

Installation instructions

		Depth	Width *
		in	(= Dimen-
		inch	sion B)
			in inch
2 zone Combiset
1	Combiset	19-5/16"	10-7/16"
2	Combisets	19-5/16"	22"
3	Combisets	19-5/16"	33-1/2"
4	Combisets	19-5/16"	45-1/32"
5	Combisets	19-5/16"	56-9/16"
4 zone Combiset
1	Combiset	19-5/16"	22"
2	Combisets	19-5/16"	45"
3	Combisets	19-5/16"	68"
Combination
One 2 zone
+ one 4 zone		19-5/16"	33-1/2"
Two 2 zone
+ one 4 zone		19-5/16"	45"
Three 2 zone
+ one 4 zone		19-5/16"	56-9/16"
One 2 zone
+ two 4 zone		19-5/16"	56-1/2"
Two 2 zone
+ two 4 zone		19-5/16"	68-1/16"

Extractor (e.g. DA 8-2)

For building in between two appliances: - Dimension B increases by 3 9/16".

For building in at the end of a combination:

-Dimension B increases by 3 7/8".

*Width includes provision for V 98 spacer bar.

Place the provided seal f under the edge of the Deep Fryer.

loosen	tighten
b Appliance
c Tensioning screw
d Clamp
e Countertop
f Seal

Turn the tensioning screws c counter clockwise until a resistance is felt, then turn the clamps d to the left.

Place the appliance into position, turn the clamps and tighten the ten- sioning screw until the clamps press into the countertop e, as shown.

Connect the appliance to the electri- cal supply.

When installing several Combiset units, a stainless steel spacer bar must be placed between the units. It is supplied with its own installation instructions.

18