Cleaning and care
If the filters have been installed incor‐ rectly, you can insert a small screw‐ driver into the slit to disengage the locking clip.
Resetting the filter saturation indica‐ tor for the grease filter
Once cleaning is complete, the filter saturation indicator must be reset.
While the fan is turned on, press the grease filter button for approx. 3 seconds, until only the 1 is flashing.
The grease filter symbol goes out.
When cleaning the grease filters before the full operating time has elapsed:
Press the grease filter button for approx. 6 seconds, until only the 1 is flashing.
OdorFree Charcoal Filter
If the hood is equipped for recirculation, an OdorFree Charcoal Filter must be in‐ stalled in addition to the grease filters.
This filter is designed to absorb odor- causing agents and is mounted in the canopy above the grease filters.
OdorFree Charcoal Filters are available from your Miele dealer or from Miele. See "Technical data" for the type and reference number.
Installing/replacing the OdorFree Charcoal Filter
To install or replace the OdorFree Charcoal Filter, the grease filters must first be removed as described above.
Remove the OdorFree Charcoal Filter from its packaging.
Press the OdorFree Charcoal Filter in‐ to the frame.
Reinstall the grease filters.
When installing the filter for the first time, activate the filter saturation counter (see "Operation").
29
