Using the washer
5. Starting a program
"Start" flashes when a program can be started.
^Press the "Start" button. The "Start" button lights.
The display shows the approximate program run time. It will count down in minutes. The first 10 minutes the washer calculates the water absorbency of the laundry. The overall program time may be shortened or lengthened.
Additionally the sequence cycle is displayed. The washer shows the current program step.
The drum light turns off after the program starts.
Press one of the following direct select buttons during the running program:
–Button D "Extras"
the displayed Extras can be selected or deselected after the program start.
–Button E "Delay Start"
the time of day and the approximate program end is displayed.
–Button G "Cancellation"
to cancel the currently running program. The wash water will be drained away.
6. At the end of a program
The
^Use the a "Door" button to open the drum door.
^Remove the laundry.
Check the drum for any missed pieces of laundry. Items inadvertently left in the washer may be damaged (e.g. shrink or discolor) during the next wash cycle.
^Check the folds of the door seal for any small articles which may have been trapped.
^Close the drum door. Otherwise foreign objects may find their way into the drum. These could be inadvertently washed and cause damage to laundry.
14
