Installation
Electrical connection
,This installation should be performed by an experienced and qualified technician, in accordance with local codes and regulations.
The washer comes with a power cord without a plug.
The machine is supplied as standard for connection to a 208 V, 60 Hz, 20 A,
For extra safety it is advisable to install a residual current device (RCD) with a trip current of 30 mA.
The machine must only be connected to the voltage and frequency shown on the data plate.
,To convert the machine to another electrical connection, please read the converting manual on the wiring diagram inside of the washer. The conversion must be performed by a Miele Service Technician. Additionally the "Heating level" setting must be adjusted.
,Do not install devices to automatically turn the washer off, i.e. a clock timer.
54