Before using for the first time
The appliance must be correctly installed and connected before the first use. Please see the "Installation instructions."
For safety reasons, it is not possible to run a spin cycle before the first use. A program must be run without laundry and detergent to flush out any residual water from the factory testing process.
^Open the water mains.
Welcome screen
The Welcome screen shows when the washer is turned on for the first time.
PROFESSIONAL
Welcome!
The welcome screen will not show anymore, when the total wash time of the washer exceeds one hour.
The display then shows the language selection.
Language J
^Select the desired language and confirm with "OK".
Shipping struts
The display reminds the user to remove the shipping struts.
^If the shipping struts were already removed, confirm with the G button. Otherwise remove them at this time then confirm.
Set the time of day
^Set the hour by turning the jog shuttle and press to confirm.
^Repeat to set the minutes and confirm. Press again to save the time of day.
Basic menu "Cottons Uni." shows
^Press the flashing button "Start". The drum door must be closed.
Once the program ends the washer can be used for laundry.
10
