Miglia Technology manual AlchemyTV DVR User Guide

Destination controls the audio output of the recorded audio during live playback.

Internal: The internal speaker of your PowerMac or the speakers attached to it will be used

External: The speakers you may have connected to the audio out of the AlchemyTV card will

be used. This can be used to pass-through the audio to another device.

Internal and

External: Both outputs will be used.

Sample controls the sample rate, the size and the mode (mono/stereo).

Note that the 48KHz setting is only available on the DVRPCI-SIL, DVRPCI-NTSC, TVPCI-SIL, TVPCI-NTSC models. The ‘older’ G4-only PAL/SECAM version of AlchemyTV does not support 48 KHz.

The best settings usually are: 48.000 kHz, 16 bits, Stereo.

AlchemyTV DVR™ User Guide

Page 30