Configuring the Switch
3-130
3
•Strict - Services the egress queues in sequential order, transmitting all traffic in the
higher priority queues before servicing lower priority queues.
Web – Click Priority, Queue Mode. Select Strict or WRR, then click Apply.
Figure3-74 Queue Mode
CLI – The following sets the queue mode to strict priority service mode.
Setting the Service Weight for Traffic Classes
This switch uses the Weighted Round Robin (WRR) algorithm to determine the
frequency at which it services each priority queue. As described in “Mapping CoS
Values to Egress Queues” on page 3-128, the traffic classes are mapped to one of
the eight egress queues provided for each port. You can assign a weight to each of
these queues (and thereby to the corresponding traffic priorities). This weight sets
the frequency at which each queue will be polled for service, and subsequently
affects the response time for software applications assigned a specific priority value.
Command Attributes
•WRR Setting Table12– Displays a list of weights for each traffic class (i.e., queue).
•Weight Value – Set a new weight for the selected traffic class. (Range: 1-15)
Console(config)#queue mode strict 4-189
Console(config)#exit
Console#show queue mode 4-192
Queue mode: strict
Console#
12. CLI shows Queue ID.