Priority Commands
4-201
4
Default Setting
None
Command Mode
Privileged Exec
Example
The following shows that HTTP traffic has been mapped to CoS value 0:
Related Commands
map ip port (Global Configuration) (4-196)
map ip port (Interface Configuration) (4-197)
show map ip precedence
This command shows the IP precedence priority map.
Syntax
show map ip precedence [interface]
interface
ethernet unit/port
-unit - This is device 1.
-port - Port number.
port-channel channel-id (Range: 1-6)
Default Setting
None
Command Mode
Privileged Exec
Console#show map ip port ethernet 1/5
TCP port mapping status: enabled
Port Port no. COS
--------- ---------- ---
Eth 1/ 5 80 0
Console#