Basic Configuration

3-9

3
Basic Configuration

Displaying System Information

You can easily identify the system by displaying the device name, location and
contact information.
Field Attributes
System Name – Name assigned to the switch system.
Object ID – MIB II object ID for switch’s network management subsystem.
Location – Specifies the system location.
Contact – Administrator responsible for the system.
System Up Time – Length of time the management agent has been up.
These additional parameters are displayed for the CLI.
MAC Address – The physical layer address for this switch.
Web server – Shows if management access via HTTP is enabled.
Web server port – Shows the TCP port number used by the web interface.
Web secure server – Shows if management access via HTTPS is enabled.
Web secure server port – Shows the TCP port used by the HTTPS interface.
Telnet server – Shows if management access via Telnet is enabled.
Telnet port – Shows the TCP port used by the Telnet interface.
POST result – Shows results of the power-on self-test
Web – Click System, System Information. Specify the system name, location, and
contact information for the system administrator, then click Apply. (This page also
includes a Telnet button that allows access to the Command Line Interface via Telnet.)
Figure3-3 System Information