![](/images/new-backgrounds/1209887/20988733x1.webp)
3-4. Electrical Service Guide
Input Voltage | 230 | |
|
| |
Input Amperes At Rated Output | 20 | |
|
| |
Max Recommended Standard Fuse Or Circuit Breaker Rating In Amperes |
| |
Circuit Breaker 1, | 20 | |
Normal Operating 3 | 30 | |
Min Input Conductor Size In AWG/Kcmil | 14 | |
|
| |
Max Recommended Input Conductor Length In Feet (Meters) | 66 | |
(20) | ||
| ||
|
| |
Min Grounding Conductor Size In AWG/Kcmil | 14 | |
|
|
Reference: 1999 National Electrical Code (NEC)
1Choose a circuit breaker with
2
3“Normal Operating” (general purpose – no intentional delay) fuses are UL class “K5” (up to and including 60 amp), and UL class “H” ( 65 amp and above).
YCaution: Failure to follow these fuse and circuit breaker recommendations could create an electric shock or fire hazard.
3-5. Selecting A Location And Connecting Input Power
18 in (457 mm) of space for airflow
L2
YAlways connect grounding conductor first.
=GND/PE
1
2
4
L1
1 Rating Label
Supply correct input power.
2Plug
3Receptacle
Connect plug to receptacle. 4 Line Disconnect Device See Section
YSpecial installation may be required where gasoline or volatile liquids are present – see NEC Article 511 or CEC Section 20.
3
L2
L1
230 VAC, 1 ![](/images/new-backgrounds/1209887/20988733xi3.webp)
YDo not move or operate unit
where it could tip.
ssb2.2* 1/94 –