![](/images/new-backgrounds/1209887/20988747x1.webp)
5-6. Cleaning Or Replacing Gun Liner
Y Disconnect gun from unit.
Head Tube
Remove nozzle, contact tip, adapter, gas diffuser, and wire outlet guide.
1/2 in
Lay gun cable out straight before installing new liner.
Blow out gun casing.
Tools Needed:
3/8 in
Remove liner.
To Reassemble Gun:
Insert new liner.
Install wire outlet guide so that 1/8 in (3 mm) of liner sticks out. Hand tighten outlet guide, and then tight- en two full turns more.
Cut liner off so that 3/4 in (19 mm) sticks out of head tube.
Install gas diffuser, adapter, contact tip, and nozzle.
Ref.