Miller Electric ICE-27T, 375 X-TREME manual Connecting Gas/Air Supply, Connecting Work Clamp

.A complete Parts List is available at www.MillerWelds.com

4-6. Connecting Gas/Air Supply

1

3

Tools Needed:

9/16 in

2

From Gas/Air

Supply

.Use only clean, dry air with 90 to 120 psi (621 to 827 kPa) pressure.

1Gas/Air Inlet Opening

2Hose

3Teflon Tape

Obtain hose with 1/4 NPT right- hand thread fitting. Wrap threads with teflon tape (optional) or apply pipe sealant, and install fitting in opening. Route hose to gas/air supply.

4-7. Connecting Work Clamp

1

2

804 505-A

1 Work Clamp

2 Workpiece

Connect work clamp to a clean, paint-free location on workpiece, as close to cutting area as possible.

802 463-A

OM-225 216 Page 11