Miller Electric 852 manual Selecting a Location, Movement

. A complete Parts List is available at www.MillerWelds.com

4-4. Selecting A Location

Movement

1

OR

2

Location And Airflow	6
3

18 in

(460 mm)

4

5

18in

(460 mm)

1Lifting Eye

2Lifting Forks

Use lifting eye or lifting forks to move unit.

If using lifting forks, extend forks beyond opposite side of unit.

3Rating Label (Non CE Models Only)

Use rating label to determine input power needs. Label located under front access door.

4 Plate Label (CE Models Only)

Label located under front access door.

5Rating Label (CE Models Only)

Use rating label to determine input power needs. Label located on rear access door (see Section 3-5).

6 Line Disconnect Device

Locate unit near correct input pow- er supply.

YSpecial installation may be required where gasoline or volatile liquids are present − see NEC Article 511 or CEC Section 20.

OM-222 Page 15