Miller Electric OM-2241 manual Remote 14 Receptacle RC8 Information

3-9. Remote 14 Receptacle RC8

Y Turn off power before con- necting to receptacle.

1 Remote 14 Receptacle RC8 Connect feeder to RC8.

1

A		J
B	K	I
C	L N	H
D	M	G
	E	F

Ref. 800 166-D

3-10. Remote 14 Receptacle RC8 Information

	Socket	Information
	A	24 volts ac. Protected by circuit breaker CB2.
24 VOLTS AC	B	Contact closure to A completes 24 volts ac contactor control circuit.
	C	Command reference; 0 to +10 volts dc.
REMOTE OUTPUT CONTROL	D	Remote control circuit common.
	E	0 to +10 volts dc input command signal from remote control.
	F	Current feedback; 1 volt per 100 amperes.
	H	Voltage feedback; 1 volt per 10 arc volts.
115 VOLTS AC	I	115 volts, 15 amperes, 60 Hz ac. Protected by circuit breaker CB1.
	J	Contact closure to I completes 115 volts ac contactor control circuit.
GND	K	Chassis common.
	G	Circuit common for 24 and 115 volts ac circuits.
REMOTE POWER ON/OFF	*	To remote On/Off switch.
REMOTE VOLTAGE SENSING	*	Voltage sensing signal from Negative (−) weld output terminal.
	*	Voltage sensing signal from Positive (+) weld output terminal.
* Not Used

OM-2241 Page 14