1 Wire Spool
2 Welding Wire
3 Inlet Wire Guide
4 Drive Roll
5 Intermediate Wire Guide
6 Outlet Wire Guide
77 Pressure Adjustment Knob
8 Gun Conduit Cable Lay gun cable out straight.
8
1 | 2 | 3 | 4 | 5 | 6 |
Tools Needed:
IMPORTANT!
For Aluminum Push−Pull welding.
Thread hub tension nut loosely
218243−A
3/4 in
Open pressure assembly.
Tighten to 1/2 lb.
1 2 
3 4
Push wire thru guides into gun;
continue to hold wire.
Close and tighten pressure assembly, and let go of wire.
. Set pressure indicator scale to 1/2 lb.
.Hold wire tightly to keep it from unraveling.
6 in (150 mm)
Pull and hold wire; cut off end.
IMPORTANT!
For Aluminum
Push−Pull welding.
Pressure4321
Indicator
Scale
218244−A
See Section
Ref. 803
