UP354BH(WDECT2355+2) OM 5/14/04 10:52 AM Page 43
Answering System Default Settings
Some answering system functions can be set through the base or handset. Default settings for each function are as follows:
Functions | Default Setting | Reference Page | |
|
| Base | Handset |
Answer On/Off | On | P. 43 | - |
Time | SUN 12:00 AM* | P. 46 | P. 19 |
Security Code | 80 | P. 46 | P. 17 |
Ring Time | 9 times | P. 47 | P. 18 |
Record Time | 1 minute | P. 47 | P. 18 |
Message Alert | Off | P. 48 | P. 18 |
Call Screen | On | P. 49 | P. 18 |
|
|
|
|
*To activate the clock and time stamp, you must setup the Time function.
TURNING THE ANSWERING SYSTEM ON/OFF
1)To turn the answering system on, press ans on/off when the phone is in standby mode.
After the announcement “Answering System is on,” the current greeting message will be played and you will hear a confirmation tone. The message counter displays the number of messages stored in memory. If the display flashes, then there are new messages waiting for you.
2)To turn the answering system off, press ans on/off. After the announcement
“Answering System is off,” the message counter display will no longer be illuminated.
[ 43 ]
