Uniden WDECT 2355+2 quick start Making and Receiving Calls, Speaker, Redial/pause

UP354BH(WDECT2355+2) OM 5/14/04 10:50 AM Page 22

•To set Autotalk, see page 16 or to set Anykey Answer see page 17.

•The handset microphone is located at the bottom of the handset (see “Controls and Functions” on page 1). Position yourself as near to the handset as possible and speak clearly.

•If the line is in use by

another handset(s),

Line BASICSIn Use appears in the display of all registered handset’s display, that are not in use.

•The base microphone is located under the base (see "Controls and Functions" on page 1). Position yourself as near to the base as possible.

[ 22 ]

MAKING AND RECEIVING CALLS

This handset has a built-in speakerphone that allows you to have a hands-free conversation. This feature allows you to communicate easily while performing other

tasks, such as cooking. appears during hands-free conversations.

You can easily switch a call from normal conversation to hands-free conversation.

To switch a call, press speaker during the call.

					From the Handset			From the Base
		Normal conversation				Hands-free conversation
To answer a call	Handset On the Cradle							Press	.
	Pick up the handset (AutoTalk)
	or pick up the handset and
	press			.
	Handset Off the Cradle					Handset Off the Cradle
	Press any number key,					Press	speaker.
					, or
	(Any Key Answer), or press
			.
To make a call	Handset Off the Cradle					Handset Off the Cradle
	1) Press				.	1) Press	speaker.	1) Press	.
	2) Listen for the dial tone.					2) Listen for the dial tone.		2) Listen for the
	3) Dial the number.					3) Dial the number.		dial tone.
				OR			OR	3) Dial the number.
	Dial the number, and then					Dial the number, and then
	press			.		press	speaker.
To hang up	Press				, or return the handset to the cradle (AutoStandby).			Press	.
To enter a pause	When you dial the number, press					redial/pause.		Press	. When
within the	“P” appears in the display, which represents a pause.							you dial the number
dialing sequence								press redial/p.