![](/images/new-backgrounds/1237156/237156103x1.webp)
UP354BH(WDECT2355+2) OM 5/14/04 10:52 AM Page 46
Time stamp will not be heard until you have set the time.
[ 46 ]
Setting the Time
Follow these steps to set the clock on the answering system to the correct time.
1)Press clock/MENU.
2)Press skip/SELECT or
repeat/SELECT until the correct day is announced and the corresponding number (from 1 Sunday to 7 Saturday) appears.
3)Press SET to select the day.
4)Press skip/SELECT or
repeat/SELECT until you hear the correct hour setting. The numbers 1 through 12 appear on the base as each hour is announced.
5)Press SET to select the hour.
6)Press skip/SELECT or
repeat/SELECT until you hear the correct minute setting. The numbers 00 through 59 appears on the base as each minute is announced.
7)Press SET to select the minute.
8)Press skip/SELECT or
repeat/SELECT until you hear the correct AM or PM setting. The message counter displays A or P.
9)Press SET to select the AM/PM setting.
A confirmation tone sounds, and the day and time you set are announced for your review.
Setting a PIN code
To play your messages from a remote location, you will need to enter a
1)Press clock/MENU twice. The current PIN code appears on the base and it is announced.
2)Press skip/SELECT or
repeat/SELECT until the desired number appears. Press
and hold skip/SELECT or
repeat/SELECT to quickly scroll through the numbers on the display.
3)Press SET to select the PIN code.
A confirmation tone sounds, the system announces the new PIN code.