Miller Electric R-115 manual White Lead

3-17. Connection For Welding Power Sources With Hubbell Receptacles

A B C 1

D

3

E

2

.Make ground lead connections

according to Section 3-9before following this procedure.

1Terminal Block 1T

2Interconnecting Power Cord

3Green Lead (Connected To Ground In Section 3-9)

Connect remaining leads to terminal block as follows:

A:115 VAC/Neutral Lead

B:115 VAC/Hot Lead

C:No Connection

D:No Connection

E:115 VAC/Contact Closure Lead

Secure strain relief clamp around cord.

Reinstall and secure wrapper to unit.

Connect remaining end of cord to welding power source.

Tools Needed:

1/4 in

Ref. 802 310 / Ref. 193 749

3-18. Connection For Miller Welding Power Sources With 14-Socket Receptacle

							1	Terminal Block 1T
				. Make ground lead connections			2	Interconnecting Power Cord
							3	White Lead
				according to Section 3-9before			4	Black Lead
				following this procedure.
							5	Red Lead
							6 Green Lead (Connected To
								Ground In Section 3-9)
				6			Connect		remaining	leads	to
			E				terminal block as follows:
		D		5			A: White Lead (115 VAC/Neutral)
	C
B							B: Black Lead (115 VAC/Hot)
A							C: No Connection
1				B A K		J I	D: No Connection
				C	L N	H	E: Red Lead (115 VAC/Contact
	3						Closure)
			4	D M		G	Secure strain relief clamp around
					E	F
							cord.
				2			Reinstall and secure wrapper to
							unit.
							Connect remaining end of cord to
							welding power source.
Tools Needed:
			1/4 in
									Ref. 802 310 / Ref. 193 749
OM-193 471 Page 18