Miller Electric R-115 manual Specifications, Site Selection, Welding Power, Wire

SECTION 3 − INSTALLATION

3-1.	Specifications
Type of Input		Welding Power	Wire Feed	Wire	Welding		Overall
				Diameter				Weight
	Power	Source Type	Speed Range		Circuit Rating	Dimensions
				Range
				.030 To 3/32 in	100 Volts,	Length: 23-1/2 in
115 Volts AC							(597 mm)
		Constant Voltage	75 to 750 ipm	(0.8 To 2.4 mm)	500 Amperes,	Width: 10-3/4 in
Single Phase
		(CV) DC And			100%			40 lb (18 kg)
2 Amperes 50/60			(1.9 To 19 mpm)				(273 mm)
		Contactor Control		Max Spool Weight:	Duty Cycle
	Hz					Height: 11 in
				60 lb (27 kg)
							(279 mm)
3-2.	Site Selection
						1	Wire Feeder
						2	Lifting Eye
						3	Rubber Feet
						4	Slot
						Choose slot that allows all rubber
						feet to sit securely on top of welding
						power source.
						5	Wire Spool/Reel
						6	Gas Cylinder (Customer
							Supplied)
						. Shielding gas pressure not to
				5	6		exceed 100 PSI (689 kPa).
						7	Welding Power Source

1

7

YDo not put feeder where welding wire hits cylinder.

YDo not move or operate equipment when it could tip.

2

4

3

802 304-A / 155 242

OM-193 471 Page 9