Miller Electric S-64, S-62 manual Optional Equipment DIP Switch Settings, Voltage Sensing Function

4-9. Optional Equipment DIP Switch Settings

. If wire feeder is equipped with a voltage sensing lead, set DIP switch S3

to the OFF position (up). If wire feeder is NOT equipped with a voltage sensing lead, set DIP switch S3 to the ON position (down).

Spot Time

Range SelectionOption Interface

Standard Settings

OFF

2	1
	OFF

2 1

1 2

X Means switch can be in either position.

. Means switch must be in this position.

Long Spot

Time

0-5 Seconds

Or

Short Spot

Time

0-2.5 Seconds

OFF

2 1

			Digital Meter Functions
	Standard					Standard				High Speed					High Speed
		Motor					Motor				Motor					Motor
Inches/Minute					Meters/Minute					Inches/Minute				Meters/Minute
			5					5				5					5
			4						4			4					4
													Or
			3	Or					3			3					3
			2					2				2					2
			1						1			1					1

	Voltage Sensing Function
	Arc Voltage Sensing Using	Arc Voltage Sensing Using
		Feedback From Welding
	Voltage Sensing Lead	Power Source
	2	2
	Or
	1	1
	DIP Switch S3	DIP Switch S3
Tools Needed:	Set To OFF	Set To ON

1/4 in

802 479 / Ref. SA-146 866-B / Ref. SA-148 666-E / Ref. SA-150 588-D

OM-1579 Page 16