Zenith DTV1080 warranty Setting the Digital TV Input, Customization

8. CUSTOMIZATION

8-14. Setting the Digital TV Input

Digital TV Input

Your Zenith HD Satellite Receiver is also capable of receiving a 8-VSB signal, if any, via digital cable. Before you move the hightlight in the sub menu, The dialogue box will pop up to make sure if you want to change the mode. After changing it, you should run “EZ Channel Scan” to view a program sent via the designated input.

To set the standby mode as a default signal source:

1.Press the Menu button on the Remote Control to display the screen menu.

2.Scroll down by using “DE” on the thumbstick on the remote control.

3.Select the Preference menu by pressing “ ” on the thumbstick.

4.Scroll down to Digital Input by using “DE” on the thumbstick.

5.Move the highlight to the right with “G” on the thumbstick.

6.The pop-up dialogue box will appear when you move the highlight to change the mode.

7.Choose “OK “ if you want to change the mode, Otherwise, choose “Cancel”.

8.Press the Exit button on the remote control to return to TV viewing.

84

206-3675