Miller Electric XMT 400 manual 60 s

1	2	3	4	5	6
			V		V
			> 60 s	V	S-179 190-A

1Warning! Watch Out! There are possible hazards as shown by the symbols.

2Electric shock from wiring can kill.

3Disconnect input plug or power before working on machine.

4Hazardous voltage remains on input capacitors after power is turned off. Do not touch fully charged capacitors.

5Always wait 60 seconds after power is turned off before working on unit, OR

6Check input capacitor voltage, and be sure it is near 0 before touching any parts.

4/96

1 2 3 4 5

S-179 304-A

1Warning! Watch Out! There are possible hazards as shown by the symbols.

2When power is applied failed parts can explode or cause other parts to explode.

3Flying pieces of parts can cause injury. Always wear a face shield when servicing unit.

4Always wear long sleeves and button your collar when servicing unit.

5After taking proper precautions as shown, connect power to unit.

				4/96
			1	Warning! Watch Out! There
		1		are possible hazards as
				shown by the symbols.
			2	Falling equipment can cause
				injury and damage to unit.
			3	Always lift and support unit
				using both handles. Keep
				angle of lifting device less
	∠ = <60°			than 60 degrees.
			4	Use a proper cart to move
	∠			unit.
			5	Do not use one handle to lift
				or support unit.
			S-179 309-A
2	3	4	5
				1/96
OM-217 769 Page 12