Minuteman UPS SNMP-NV6 4. Configuration Methods

SNMP-NV6

Page 8

4. Configuration Methods

The easiest way to configure the SNMP-NV6 card is to run the EzSetting program, which

you can find on the provided CD. Once you have configured the essential network

parameters successfully, you can launch a Web Browser or telnet to the SNMP-NV6 card to

execute more detailed configuration.

4.1 Configure the SNMP-NV6 card by EzSetting

1. Prepare a workstation (Microsoft Windows 2000, 2003, 2008, XP, Vista, Win7 or

later).

2. Make sure both of the dipswitches of the SNMP-NV6 card are set to the OFF

position (normal mode) to enable the network transmission.

3. Make sure the workstation and the SNMP-NV6 card are in the same LAN.

4. Connect the Network cable to the Network Port on the SNMP-NV6 card.

5. Put the CD in and open the EzSetting program.

Note: The Windows Firewall may need to be turned off while using the EzSetting

program.

6. Press the Discover button to search for all of the SNMP-NV6 cards in the LAN. All

of the SNMP-NV6 cards will be listed in the Device List as shown below.

7. If you want to search all of the SNMP-NV6 cards in a different domain network, just

change the Subnet and Subnet Mask and then press the Discover button to list

them.

8. If the SNMP-NV6 card cannot be found, check the networking port UDP 3456 in the

OS. Open it if it is blocked.

Contents

Main SNMP-NV6 About this manual Electromagnetic Interference Safety Information Save this Manual Table of Contents Page 1. Overview 1.1 Features 1.2 Package Contents 2. Description 2.1 Ports 2.1.1 LED Indicators 2.1.2 Dipswitch Settings 3. Installation 4. Configuration Methods 4.1 Configure the SNMP-NV6 card by EzSetting 4.2 Configure the SNMP-NV6 card through COM Port 4.3 Configure the SNMP-NV6 card through Telnet 4.4 Configure the SNMP-NV6 card via Text Mode 4.4.1 SNMP-NV6 cards Main Menu 4.4.1.1 User Manager 4.4.1.2 TCP/IP Setting 4.4.1.3 Network Parameter 4.4.1.4 Time Server 4.4.1.5 Soft Restart 4.4.1.6 Reset All To Default 4.4.1.7 Exit Without Save 4.4.1.8 Save And Exit 5. Web Interface 5.1 Run a Web Browser 5.2 UPS Information 5.2.1 UPS Properties 5.2.2 Battery Parameters 5.2.3 In/Out Parameters 5.2.4 Identification 5.2.5 Status Indication 5.3 UPS Management 5.3.1 Configure 5.3.1.1 Auto Restart 5.3.1.2 UPS Buzzer 5.3.1.3 Low Battery 5.3.1.4 UPS Shutdown Action 5.3.1.5 Smart Shutdown 5.3.2 Control 5.3.2.1 Battery Test 5.3.2.2 Shutdown & Restart UPS Only 5.3.2.3 Smart Shutdown 5.3.2.4 Outlet Control 5.3.2.5 Power Fail/Restore Simulation 5.3.3 Weekly Schedule 5.3.4 Specific Schedule 5.4 Administration 5.4.1 User Manager 5.4.2 TCP/IP 5.4.2.1 IPv4 5.4.2.2 IPv6 5.4.2.3 System 5.4.3 Web 5.4.3.1 Web 5.4.3.2 SSL Certificate 5.4.4 Console 5.4.4.1 Console 5.4.4.2 Host Key 5.4.5 FTP 5.4.5.1 FTP 5.4.6 Time Server 5.4.6.1 Simple Network Time Server 5.4.6.2 Manual 5.4.7 Syslog 5.4.8 Batch Configuration 5.4.9 Upgrade 5.5 Notification 5.5.1 Event Level 5.5.2 SNMP Access 5.5.2 SNMPv3 USM (User Based Management) 5.5.3 SNMP Trap 5.5.4 Mail Server 5.5.5 Wake On LAN 5.6 History 5.6.1 Event Log 5.6.2 Data Log 5.6.3 History Configure 5.7 Environment 5.7.1 Information 5.7.2 Configuration 6. Upgrade Page 7. Specifications 7.1 Technical Specifications 7.2 DIP Switch Settings 7.3 LED Indicators 8. Troubleshooting Page Page 9. Limited Product Warranty