Minuteman UPS SNMP-NV6 5.4.5 FTP , 5.4.5.1 FTP , 5.4.6 Time Server

SNMP-NV6

Page 26

5.4.5 FTP

This menu allows the administrator to enable or disable the FTP communication protocols

available in the SNMP-NV6 card.

5.4.5.1 FTP

FTP: Enabling or disabling the FTP connection with the SNMP-NV6 card.

FTP Port: The user may configure FTP protocol to use a port number other than

standard FTP port (21).

5.4.6 Time Server

This menu allows you to set the SNMP-NV6 card’s internal date and time. There are 2 ways

to set the date and time. Synchronize with SNTP server or set the date and time manually.

Note: If the SNTP is enabled, but cannot get any reply from the assigned time server then

the event log and data log will not work.

Contents

Main SNMP-NV6 About this manual Electromagnetic Interference Safety Information Save this Manual Table of Contents Page 1. Overview 1.1 Features 1.2 Package Contents 2. Description 2.1 Ports 2.1.1 LED Indicators 2.1.2 Dipswitch Settings 3. Installation 4. Configuration Methods 4.1 Configure the SNMP-NV6 card by EzSetting 4.2 Configure the SNMP-NV6 card through COM Port 4.3 Configure the SNMP-NV6 card through Telnet 4.4 Configure the SNMP-NV6 card via Text Mode 4.4.1 SNMP-NV6 cards Main Menu 4.4.1.1 User Manager 4.4.1.2 TCP/IP Setting 4.4.1.3 Network Parameter 4.4.1.4 Time Server 4.4.1.5 Soft Restart 4.4.1.6 Reset All To Default 4.4.1.7 Exit Without Save 4.4.1.8 Save And Exit 5. Web Interface 5.1 Run a Web Browser 5.2 UPS Information 5.2.1 UPS Properties 5.2.2 Battery Parameters 5.2.3 In/Out Parameters 5.2.4 Identification 5.2.5 Status Indication 5.3 UPS Management 5.3.1 Configure 5.3.1.1 Auto Restart 5.3.1.2 UPS Buzzer 5.3.1.3 Low Battery 5.3.1.4 UPS Shutdown Action 5.3.1.5 Smart Shutdown 5.3.2 Control 5.3.2.1 Battery Test 5.3.2.2 Shutdown & Restart UPS Only 5.3.2.3 Smart Shutdown 5.3.2.4 Outlet Control 5.3.2.5 Power Fail/Restore Simulation 5.3.3 Weekly Schedule 5.3.4 Specific Schedule 5.4 Administration 5.4.1 User Manager 5.4.2 TCP/IP 5.4.2.1 IPv4 5.4.2.2 IPv6 5.4.2.3 System 5.4.3 Web 5.4.3.1 Web 5.4.3.2 SSL Certificate 5.4.4 Console 5.4.4.1 Console 5.4.4.2 Host Key 5.4.5 FTP 5.4.5.1 FTP 5.4.6 Time Server 5.4.6.1 Simple Network Time Server 5.4.6.2 Manual 5.4.7 Syslog 5.4.8 Batch Configuration 5.4.9 Upgrade 5.5 Notification 5.5.1 Event Level 5.5.2 SNMP Access 5.5.2 SNMPv3 USM (User Based Management) 5.5.3 SNMP Trap 5.5.4 Mail Server 5.5.5 Wake On LAN 5.6 History 5.6.1 Event Log 5.6.2 Data Log 5.6.3 History Configure 5.7 Environment 5.7.1 Information 5.7.2 Configuration 6. Upgrade Page 7. Specifications 7.1 Technical Specifications 7.2 DIP Switch Settings 7.3 LED Indicators 8. Troubleshooting Page Page 9. Limited Product Warranty