Minuteman UPS SNMP-NV6 5. Web Interface

SNMP-NV6

Page 15

5. Web Interface

5.1 Run a Web Browser

1. Make sure that you have a TCP/IP network already installed.

2. Start your Web Browser. Enter http://host_name or http://ip_address in the

address bar for the plain web transmission or https://host_name or

https://ip_address for the encrypted web transmission. The SNMP-NV6 card will

then ask for your user name and password. After keying in the correct user name

and password, the SNMP-NV6 card’s Home Page will appear on the screen.

3. If the login page does displayed, but you are unable to login with the correct user

name and password, it might be because that the IP address that you used to login

is different from the SNMP-NV6 card’s IP address subnet.

Note: The SNMP-NV6 card will automatically logout the user if there is no activity for 30-

minutes.

5.2 UPS Information

This section includes information about the identification, the battery voltage, the battery

status and the status indication of the UPS. Because different models provide different

information, the model you have may not display the same information.

Contents

Main SNMP-NV6 About this manual Electromagnetic Interference Safety Information Save this Manual Table of Contents Page 1. Overview 1.1 Features 1.2 Package Contents 2. Description 2.1 Ports 2.1.1 LED Indicators 2.1.2 Dipswitch Settings 3. Installation 4. Configuration Methods 4.1 Configure the SNMP-NV6 card by EzSetting 4.2 Configure the SNMP-NV6 card through COM Port 4.3 Configure the SNMP-NV6 card through Telnet 4.4 Configure the SNMP-NV6 card via Text Mode 4.4.1 SNMP-NV6 cards Main Menu 4.4.1.1 User Manager 4.4.1.2 TCP/IP Setting 4.4.1.3 Network Parameter 4.4.1.4 Time Server 4.4.1.5 Soft Restart 4.4.1.6 Reset All To Default 4.4.1.7 Exit Without Save 4.4.1.8 Save And Exit 5. Web Interface 5.1 Run a Web Browser 5.2 UPS Information 5.2.1 UPS Properties 5.2.2 Battery Parameters 5.2.3 In/Out Parameters 5.2.4 Identification 5.2.5 Status Indication 5.3 UPS Management 5.3.1 Configure 5.3.1.1 Auto Restart 5.3.1.2 UPS Buzzer 5.3.1.3 Low Battery 5.3.1.4 UPS Shutdown Action 5.3.1.5 Smart Shutdown 5.3.2 Control 5.3.2.1 Battery Test 5.3.2.2 Shutdown & Restart UPS Only 5.3.2.3 Smart Shutdown 5.3.2.4 Outlet Control 5.3.2.5 Power Fail/Restore Simulation 5.3.3 Weekly Schedule 5.3.4 Specific Schedule 5.4 Administration 5.4.1 User Manager 5.4.2 TCP/IP 5.4.2.1 IPv4 5.4.2.2 IPv6 5.4.2.3 System 5.4.3 Web 5.4.3.1 Web 5.4.3.2 SSL Certificate 5.4.4 Console 5.4.4.1 Console 5.4.4.2 Host Key 5.4.5 FTP 5.4.5.1 FTP 5.4.6 Time Server 5.4.6.1 Simple Network Time Server 5.4.6.2 Manual 5.4.7 Syslog 5.4.8 Batch Configuration 5.4.9 Upgrade 5.5 Notification 5.5.1 Event Level 5.5.2 SNMP Access 5.5.2 SNMPv3 USM (User Based Management) 5.5.3 SNMP Trap 5.5.4 Mail Server 5.5.5 Wake On LAN 5.6 History 5.6.1 Event Log 5.6.2 Data Log 5.6.3 History Configure 5.7 Environment 5.7.1 Information 5.7.2 Configuration 6. Upgrade Page 7. Specifications 7.1 Technical Specifications 7.2 DIP Switch Settings 7.3 LED Indicators 8. Troubleshooting Page Page 9. Limited Product Warranty