Internal Settings
Internal settings determine basic operating conditions, for example, units of measure. To access internal settings, at the startup
1.Follow the steps below to change internal settings.
(1)Determining Metric/American standard units of measure
The feedback windows show the present setting.
American standard
, | U | N | I | T | - | L | B |
| Metric standard |
|
|
|
|
|
|
| U | N | I | T | - | K | G |
Press ＜▲/▼＞ keys to toggle from one setting to another. When your preferred unit of measurement appears press the ENTER key to confirm your choice and proceed to the next setting.
(2)The total time of use appears in the feedback window. Press the ENTER key to proceed to the next internal setting.
T 
I 
M 
E 
- 
X 
X 
X 
X 
X 
X 
H 
O 
U 
R
(3)The total distance ridden appears in the feedback window. Press the ENTER key to proceed to the next internal setting.
D 
I 
S 
T 
- 
X 
X 
X 
X 
X 
X 
X 
X 
K 
M
(4) The following prompt appears:
PRESS UP/DN TO ACTIVATE OR DEACTIVATE 4 USER SETTING
Press the ▲/▼ keys as directed. The display toggles between two views.
To enable USER IDs, toggle to the following: |
|
|
U S E R - I D | - | O N |
To disable USER IDs, toggle to the following:
U S E R - I D | - | O F F |
Press the ENTER key to confirm your choice and proceed to the next step.
(5) The display shows the display main program IC version as follows:
XXXXX－ XX
Example: C520H - 1A
Press the ENTER key to confirm settings and proceed to the start up banner.
2. If the ENTER key is not pressed in six seconds, the FEEDBACK window shows
P 
R 
E 
S 
S 
E 
N 
T 
E 
R
22
