STEP 2. First slip the pedestal cover onto the pedestal. Position the data cable for safety. Then insert the pedestal onto its mount. Lightly tighten bolts A into the lower holes (at position D) to secure the pedestal. Do not fully tighten these bolts. Pull the pedestal downward until the other holes come into place and bolts can be secured. See Figure 3.
Tighten bolts in position C as shown in Figure 4. Then secure bolts in positions A and B, as shown in Figure 4.
Connect data cable connectors, then insert the cable into the pedestal, as shown in Figure 5.
Place the pedestal cover in place to meet the top cover as shown in Figure 6.
Fig.4
Fig.3
Fig.5 | Fig.6 |
7
