GUIDE TO INSTALLATION AND OPERATION
3 Operations
This section describes the control panel for the
Local Control (Full)
In the Local Control mode, the panel is physically mounted to the
Remote Control (Full)
In the Remote Control mode, the panel is mounted apart from the chassis. It is connected to the chassis via an Ethernet connection and powered by an external power supply. The Remote panel can be assigned to any
Control Panel Layout
The control panel is divided into 10 Sections.
•Section 1 – Input / Output channel selection
•Section 2 – Video source selection
•Section 3 – Format (video line &
•Section 4 – Aspect Ratio selection
•Section 5 – Audio source selection
•Section 6 – Display, rotary encoder, USB port
•Section 7 – Proc Amp
•Section 8 – Logo, Channel ID
•Section 9 – Audio and System status LEDS
•Section 10 – Remote, Tally, Power Switch
Function buttons (Qty 48)
•“Soft” buttons associated with panel functions such as input select, video select, etc.
Display buttons (Qty 10)
“Soft” buttons associated with the LCD display.
•8 buttons for use with display
•1 button for the Menu ”Home” function
•1 button for the Menu ”Back” function
Rotary Encoder
•The rotary encoder is a linear encoder with push function.
Power switch
•A power switch is located at the
•The power switch controls power for the control panel and the
LEDs
The
•
oThe LED’s are red, green, blue
18