GUIDE TO INSTALLATION AND OPERATION
Graphical User Interface (GUI) and Menu Controls – Section 6
Display Controls (8 Buttons around display) - Assigned based on current MENUTREE page
Button Color
Green
Yellow
State | Mode | Comments |
Solid | All | Available but not selected |
Solid | All | Selected |
Rotary Encoder
•Rotation – Used to navigate MENUTREE or adjust sliders
•Push – Used to select front panel button selections
Back (Button) – Takes you to the previous menu
•There is no LED associated with this button
Home (Button) – Takes you to the top of the MENUTREE (Main Menu)
•There is no LED associated with this button
MENU (Button) – Takes you to top level menu (Main Menu) on the MENUTREE. Will also switch between showing active video, from the currently selected input or output channel, and the MENUTREE on the Control Panel LCD display.
Button Color
Yellow
State | Mode | Comments |
Solid | All | Alternates the display between active video and the MENUTREE |
Note: Active video is not available when the unit is in Update mode
SETUP (Button) – Takes you to the Setup Menu on the MENUTREE
Button Color
Yellow
State | Mode | Comments |
Solid | All | Takes you to the Setup Menu |
PROC BYPAS (Button) – All Proc Amp, Detail Enhance and Sharpness settings are disabled
Button Color
Yellow
Yellow
State | Mode | Comments |
Solid | Update | Proc Amp settings are applied to the selected processing |
|
| channel |
Flashing | Update | Proc Amp settings are disabled on the selected processing |
|
| channel |
