GUIDE TO INSTALLATION AND OPERATION
Video Select – Section 2
SDI 1 (Button) – Assigns the SDI 1 Input to the currently selected input channel or SDI 1 output to the currently selected output channel. After selecting, press the ROTARY ENCODER to accept.
Button Color
Red
Green
Cyan
Blue
Blue
State | Mode | Comments |
Flashing | Update | No input signal (only when selected) |
Solid | Update | Available but not selected |
Solid | Active | Shows association with currently selected input or output |
Solid | All | Shows the state of the currently selected input or output |
Flashing | Update | NEW source or destination selected – Press the ROTARY |
|
| ENCODER to confirm |
Note: SDI IN 1 will always be associated with SDI OUT 1.
SDI IN 1 may also be associated with SDI OUT 2 if used in the
SDI 2 (Button) - Assigns the SDI 2 Input to the currently selected input channel or SDI 2 output to the currently selected output channel. After selecting, press the ROTARY ENCODER to accept.
Button Color
Red
Green
Cyan
Blue
Blue
State | Mode | Comments |
Flashing | Update | No input signal (only when selected) |
Solid | Update | Available but not selected |
Solid | Active | Shows association with currently selected input or output |
Solid | All | Shows the state of the currently selected input or output |
Flashing | Update | NEW source or destination selected – Press the ROTARY |
|
| ENCODER to confirm |
Note: SDI IN 2 will always be associated with SDI OUT 2.
CPST 1 (Button) – Not functional / Future expansion
CPST 2 (Button) – Not functional / Future expansion
COMP (Button) – Not functional / Future expansion
DVI OUT (Button) – Not functional / Future expansion
