GUIDE TO INSTALLATION AND OPERATION
Audio Select – Section 5
SDI 1 (Button) – Assigns the embedded audio from the SDI 1 to the currently selected input or output channel. After selecting, press the ROTARY ENCODER to accept.
Button Color
Red
Green
Cyan
Blue
Blue
Off
| State |
| Mode | Comments |
| Flashing | Update | No input signal (only when selected) | |
Solid |
| Update | Available but not selected | |
Solid | Active | Shows association with currently selected input or output | ||
| Solid | All | Shows the state of the currently selected input or output | |
| Flashing | Update | NEW source or destination selected - Press the ROTARY | |
| n/a |
| All | ENCODER to confirm |
|
| Disabled if SDI 2 is selected as the input video source |
SDI 2 (Button) – Assigns the embedded audio from the SDI 2 to the currently selected input or output channel. After selecting, press the ROTARY ENCODER to accept.
Button Color
Red
Green
Cyan
Blue
Blue
Off
| State |
| Mode | Comments |
| Flashing | Update | No input signal (only when selected) | |
Solid |
| Update | Available but not selected | |
Solid | Active | Shows association with currently selected input or output | ||
| Solid | All | Shows the state of the currently selected input or output | |
| Flashing | Update | NEW source or destination selected - Press the ROTARY | |
| n/a |
| All | ENCODER to confirm |
|
| Disabled if SDI 1 is selected as the input video source |
AES (Button) – Not functional / Future expansion ANA (Button) – Not functional / Future expansion AUDIO RESET (Button) – Not functional / Future expansion AUDIO MENU (Button) - Not functional / Future expansion
28